Abrasive wear of dental composite resins

Abrasive wear is a major problem in the application of dental composite resins. In this study the friction and wear behaviours of two types of dental composites: one containing relatively coarse filler particles and some microfillers (Estilux) and another containing only microfiller particles (Durafill), have been investigated by using a scratch testing machine. Experimental results show that the coefficients of friction in both composites are essentially constant for applied loads up to 20 N. The wear resistance of Durafill is better than Estilux. Under the same testing conditions, the size, shape and distribution of the filler particles are more important variables than applied load and sliding speed in controlling the wear mechanism. It is shown that for Estilux, plastic ploughing by the diamond indenter is the predominant mechanism. For Durafill, however, the formation and propagation of tensile cracks on the worn surface is the main wear mechanism. The effects of two different indenters, diamond and enamel, on the basic wear mechanisms are also discussed.     

Experimental data and approximate estimation for dissociation time of hydrate plugs

New experimental data coupled with a numerical model and an approximate solution are proposed to predict dissociation time of hydrate plugs in oil sub-sea pipelines. The experimental hydrate plugs are dissociated by the method of symmetric depressurisation, both in a specially designed apparatus and a classical batch reactor. The agreement between the estimation of the model and the experimental data and the simplicity of the approximate equation presents an advantage in estimating the time of hydrate plug dissociation in pipelines.     

The geometric nature of plasticity laws

This paper concerns the plasticity constitutive laws in small strain. In the thermodynamic approach developed here, the key concept is that of internal variables. The differential nature of plasticity law has been pointed out for a long time. If we unite the invariance condition of these laws in a state variable transformation, this involves, ultimately, that the natural mathematic frame of plasticity theory is Differential Geometry. The system state is defined as a point of a differentiable manifold. The state variable are the local coordinates of this point in a chart. The internal stresses are the components of a covariant vector of the cotangent bundle to internal state manifold and the elastic domain is a convex part of cotangent vector space. The plastic yield criteria such as von Mises condition define a Riemannian structure over the manifold. The metric element is identified with the internal dissipation element. Constitutive laws link the covariant derivatives of the thermodynamic stress with the state variable. Hardening modulus splits up in two parts, kinematic hardening and metric hardening. This last is defined by Christoffel connection coefficients. Applied to von Mises isotropic yield condition, the metric hardening is identified with isotropic hardening. The Baltov-Sawczuk model is also analysed. The use of appropriate polar coordinates simplifies significantly the computations. Generalization to a significant category of non-differentiable yield criteria, such as Tresca condition, is considered by introducting a metric tensor family. The adaptation of Drucker's postulate to the proposed model requires the introduction of parallel transport of the internal stress covector. Generally, this transport is different over distinctive paths joining two points. This fact expresses internal state manifold curvature. The Riemann-Christoffel tensor is computed for von Mises, Baltov-Sawczuk and Tresca models.     

Hybrid gas-to-particle conversion and chemical vapor deposition for the production of porous alumina films

Porous alumina films can be found in a wide variety of materials, including filters, thermal insulation components, dielectrics, biomedical and catalyst supports, coatings and adsorbents. Production methods for these films are as equally diverse as their applications. In this work, a hybrid process based upon chemical vapor deposition and gas-to-particle conversion is presented as an alternative technique for producing porous alumina films, with the main advantages of solvent-free, low substrate-temperature operation. In this process, nanoparticles were produced in the vapor phase by reaction of aluminum acetylacetonate in the presence of oxygen. Downstream of this reaction zone, these nanoparticles were collected via thermophoresis onto a cooled substrate, forming a porous film. Some deposited films were subjected to post-processing in the form of annealing in air. Fourier-transform infrared spectra and X-ray energy-dispersive spectroscopy analysis confirmed the production of alumina at processing temperatures above 973 K. X-Ray diffraction revealed that the films were amorphous. Film thickness, ranging from 30 to 250 μm, and the average deposition rate were determined from scanning electron microscopy results. From transmission electron microscopy, the average primary particle size was determined to be approximately 18 nm and the formation of nanoparticle aggregates was evident. Annealing of the films at temperatures ranging from 523 to 1173 K in the presence of air did not have an effect on particle size. The specific surface area of the powder composing the films ranged from 10 to 185 m² g⁻¹, as determined from nitrogen gas adsorption by the Brunauer–Emmett–Teller method.     

Development of a Tunable Multiband UWB Radar Sensor and Its Applications to Subsurface Sensing

Development of a new tunable multiband ultra-wideband (UWB) radar sensor is presented. The UWB sensor integrates the transmitter, receiver, and antennas completely in a single package using microwave integrated circuits and operates over multiple pulse durations or frequency bands. The sensor can transmit pulses with duration varying from 450 to 1170 ps and peak power from 200 to 400 mW and can detect signals with a conversion gain of 6.5-9.5 dB and a dynamic range of 50dB over a 5.5-GHz RF bandwidth. It has a range resolution of around 1 in. The sensor performs well through tests of various samples, demonstrating its success for subsurface sensing. The multipulse/multiband feature allows the sensor to achieve both fine-range resolution and long operating range and enhanced target detection and classification     

Increase in urinary calcium and oxalate after fructose infusion

We have previously shown that an oral glucose load increased both calciuria and oxaluria while the ingestion of fructose induced a rise in calciuria and a decrease in oxaluria. This latter effect remains unclear and might be linked to the reduced intestinal oxalate absorption subsequent to digestive intolerance in some subjects. Such a hypothesis could be enlightened by the study of a parenteral fructose load. Therefore in 7 healthy subjects, we compared the effects of fructose infusion (F) (15 min iv infusion at 0.185 mmol/kg BW/min) to a control glucose infusion (G) on urinary calcium and oxalate. In this study, glycemia and insulinemia increased less after (F) than after (G) (respectively + 21% vs + 216%, p < 0.001 and + 230% vs + 402%, p < 0.05) and phosphatemia decreased less after (F) than after (G) (-7% vs -14%, p < 0.05). Urinary calcium and oxalate increased only after (F) (respectively + 64%, p < 0.01 and + 60%, p < 0.05). Urinary uric acid, another urolithiasis factor, increased after both (F) and (G) (respectively + 45%; p < 0.01 and + 42%; p < 0.01) but uricemia increased only after (F) (+ 25%; p < 0.01). Our results suggest an additional reason to avoid the use of fructose in parenteral nutrition, particularly in individuals with a known history of either calcium oxalate or urate urolithiasis.     

Energy-aware wireless networking with directional antennas: the case of session-based broadcasting and multicasting

We consider ad hoc wireless networks that use directional antennas and have limited energy resources. To explore quantitatively the advantage offered by the use of directional antennas over the case of omnidirectional antennas, we consider the case of connection-oriented multicast traffic. Building upon our prior work on multicasting algorithms, we introduce two protocols that exploit the use of directional antennas and evaluate their performance, We observe significant improvement with respect to the omnidirectional case, in terms of both energy efficiency and network lifetime. Additionally, we show that further substantial increase in the network's lifetime can be achieved by incorporating a simple measure of a node's residual energy into the node's cost function.     

In situ SEM studies on the effects of particulate reinforcement on fatigue crack growth mechanism of aluminium-based metal-matrix composite

The effects of particulate reinforcement on the fatigue behaviour and fatigue mechanisms of two 6061 aluminium-based metal-matrix composites (MMCs) in three different heattreatment conditions were studied in situ with a scanning electron microscope and compared to the unreinforced alloy in the as-received condition. It was observed that the fatigue properties of the MMCs were influenced by the ceramic particles in two ways: firstly the particles increased the fatigue stress intensity threshold mainly by crack-deflection and crack-closure mechanisms, and secondly, the particles raised the fatigue crack growth rates in the Paris region by providing an easy crack path. The effect of ageing was small on the fatigue stress intensity threshold of MMCs, but for the peak-aged MMCs the fatigue crack growth rates in the Paris region were faster. The mechanism of fatigue crack growth was largely associated with the matrix/particle interface and the linkage with subcracks initiated ahead of the main crack at high applied stress intensity factors.